|
Headlight fuse blew in high-beam setting after a few minutes of running.
I'm gonna change my design and try again--this time, instead of running the diode jumper from the high-beam to the low-beam, I am gonna cut the passing lamp wire off the low bean circuit and connect the passing lamp circuit to the high-beam via a diode and to the low beam via a diode.
The main difference will be that, when I switch to high beam, the low beam will now turn off--but the passing lamps will remain illuminated.
Should work. I'll report back after I've done it.
-Fat
__________________
2002 FLSTFI
-Stock jugs .125" over
-95" SE forged pistons
-Cometic .040" head gasket (9.8:1)
-S&S 510G cams
-S&S gear drive kit
-Baisley LMR-002 spring
-24/37 (1.54:1) primary gearing
-SuperTrapp Mean Mothers
-SE Air Cleaner
-SE Race Tuner
ASE Certified:
-Master Automobile Technician
-Advanced Engine Performance Specialist
-Master Engine Machinist
Member:
-Society of Automotive Engineers (US)
-Institute of the Motor Industry (UK)
|
.gif&contenttype=gif "Wheeldock.com")
