Quote:
Originally Posted by Jeffytune
Hi Andy,
I believe it is made to mount on top of the ECU, not under it.
I find that if you trim the mounting screws (The ones for the Fuelpak mounting bracket to unit) it goes a bit smoother.
|
Thanks for the reply Jeffytune,
I've done it this morning, looking at the video again the space was not free below the ECU on my bike, a 3"x2" box of tricks (maybe the alarm) was in the way so I moved this and I got it fitted.
I've taken off the servo for the exhaust flap and removed the cable. I have also tack welded the flat open.
I used ref FP-2075
I'm running a HyperCharger, Rush Slip On's.
Thanks again,
Striker (Andy)
