Quote:
Originally Posted by DCRANER
On my 07 FLHRS I have the FuelPak setting FP-0674, runs nice.
Now, a buddy of mine suggested setting Mode # 17 from the current 0 to a 3 to 5 range. He did a 3 on his 08 FatBoy and it did work well, supposed to richen up the idle. It did knock his temps down more than before.
So, will give this a try, but can I just change #17 or do I have to do all the steps like from the initial install?
|
I would caution against this, each model is a bit diffrerent, and what may work on a softail per-say, may cause problems on a touring model.
The ECM's are different, the programs are different.
__________________
I'm Just Sayin'...
2007 FLHT 96 CID W/IDS drive
K&N Air filter system
Vance & Hines Pro Pipe BP & FuelPak.
GMR Roller rockers.
Crane adjustable pushrods.
93.25 Torque 78.74 HP
Member DooF Clenas , and proud of it.
Professional Rockat Surgen
Disclaimer.
I do not work for Vance and Hines, I just like there stuff. Any suggestions I make are to be use at your own risk.
