Yes and no, the cable from the computer to interface is a common USB printer cable, so no on this one, but the cable from the interface to the bike is the same, so yes.
Here are the pinouts if you want to make you own cable for the interface to the bike:
Numbers represent pin locations on connector:
Deutsch connector:
1 2
3 4
DB9 Connector:
12345
6789
DC to DB9: pin 1 to pin 1
DC to DB9: pin 2 to pin 6
DC to DB9: pin 3 to pin 5
DC to DB9: pin 4 to pin 8
Hope this helps,
Cheers,
Frank
.gif&contenttype=gif "Wheeldock.com")
