Quote:
Originally Posted by sstan
Good idea Curtis. I'd kind of forgotten about the user functions and had long ago dismissed them as a NOS trigger only. In looking at them again I see that it can be used to selectively retard timing based on speed, TPS and RPM. I'm assuming you are using the RPM/TPS based switch. It's interesting that the screen says the Default is OFF but on the canned maps it's on with a 0 retard value. Seems like switching it off would free up processor resources, one less thing to monitor. Kind of like sampling for the nominal IAC.
|
Curtis helped me out on this....IT WORKS VERY WELL!
Hey Curt, It's still in the shop...I should have it by thurs . I told the indy not to start it until I load the map.....I'll probably be calling you on sat.
Tom
__________________
2007 Ultra
SE 103"
SE 50mm tb
Branch heads
Crane 290 cams
Feuling race lifters
Rinehart TD's
SERT
Last edited by tomdubya : 03-08-2008 at 11:24 AM.
|
.gif "Wheeldock.com")
