Quote:
Originally Posted by WVRDKING
Doc: Hope I'm not misunderstanding the above, but when I first got the SERT I did a Data Recording of Idle characteristics at operating temperature and it was definitely operating in Closed Loop.
Results showed:
1012 RPM
TP: 0%
MAP: 41.0
AFR Desired: 14.6
Checking the map that was loaded showed this MAP/RPM in the CL portion of the AFR Table.
Thanks for your input!
 |
Again this depends what map your using, the new 477v with the 176 files has most of the maps at closed loop in the 20 KPA area which would be in the idle area. The first two maps in the 176 files are in open loop and set at 13.0:1~12.5:1. The 462v 159 files had more open loop at 20 KPA than closed loop if my memory serves me right. Bottom line is I should have said some are and some aren't....my mistake
