Quote:
Originally Posted by Jeffytune
Hi Greg.
I am doing the best I can one handed and working around the pain pills.
Ok, 19 is the throttle calibrate, you will need to wot,then shut the throttle. in cell 20 will tell you witch version your software is, 21 is a code set, used for diagnostics and 22 is used to confirm your throttle calibrate, you can wot the throttle, and the numbers should smoothly go from 00 to 99.
you need to set the throttle so you can go on to 23.
|
Jeffy, I hope you are feeling OK, really appreciate your help.
Per the online pdf instructions, mode 21 is what is used to confirm the calibration (i.e. codes go from 0 to 99 as you turn the throttle). This is also how my system works, which I have done.
I say this since you indicate this is done in mode 22??
On my system, when I scroll forward after mode 21 (which checkes out OK), it goes to mode 22, which has a setting of 0, then it goes to mode 1. I cannot figure out how to advance past mode22.
As I indicated, the e mail from V&H does not even address a mode 22 (skips from mode 18 to 23). Perhaps there was a typo, and they meant to change mode 22 (they indicate a setting for mode 23 of 16) ??
BTW, on mode 20, the code is 11, which I presume is my version ?.
Thx
greg
_dec5_08.gif "360 Brake Company")
.gif "Wheeldock.com")
