|
Thanks for the help you've been giving me bbrowncode.
I'm still editing the 5% row a little at a time to fix my problem. IAC values and warmed-up AFR is spot on, it's just a few of the values at the very start that are causing it to lean out and die.
The bad part, is I can only do one correction or so per day, because of the temps I'm trying to edit at (0 degrees C... cold, very cold).
This morning it was a brisk 23 F degrees outside when I tried to start the bike, and I got a NEW error when it died "P505 IAC High".
I'm starting to think my biggest problem is the fact that I don't have a garage for the bike, so the engine temp is the same as the outside temp when I first try to start it each morning.
The fact that DTT is based out of Florida, I don't think they ever have this problem :-/
It is getting better though!.. Just slowly.
The first morning I get it to start and continue running, I'll be sure and grab the log and post both the log and the map I end up with... just to make sure I didn't overdo anything.
Again, thanks for all the help everyone's been giving me.
|
_dec5_08.gif "360 Brake Company")
